Free Shipping on orders over US$39.99 How to make these links

Troubleshooting Guide: Why Is Your Generac Generator Not Producing Power?

Generac generators are reliable and efficient power sources for many households and businesses. However, when they fail to produce power, it can be frustrating and problematic. If you’re experiencing issues with your Generac generator not producing power, there are a few troubleshooting tips to try before calling in professionals for help.

In this blog post, we’ll explore some common causes of power failure in Generac generators, as well as some practical solutions to get your generator up and running again. Whether you’re dealing with a sudden power outage or a persistent problem with your generator, this guide will provide insights to help you resolve the issue and get back to business as usual.

Check Fuel Levels

If your Generac generator is not producing power, one of the first things you should check is the fuel levels. Generators cannot generate power without fuel to drive the engine. Start by checking the fuel gauge to see if you have enough fuel.

If not, add more fuel to the generator. Ideally, you should make sure that the fuel is fresh and clean and that the fuel filter is clean too. Dirty fuel filters can cause problems with your generator, and you should make sure that the fuel is free from impurities to ensure maximum efficiency.

Remember that checking the fuel levels is just one step in troubleshooting your generator. If you are still having problems after checking the fuel, it’s best to call a professional to help you diagnose the issue. But, if you find that the fuel levels were low and topping them up doesn’t solve the problem, you’ll need to look further as to the reason why your Generac generator isn’t producing power.

Look for Low Fuel Level

When it comes to driving, one of the most important things you can do is check your fuel levels. It’s easy to forget about refueling, especially when you’re distracted or in a rush. However, running out of gas can be a frustrating and potentially dangerous experience.

That’s why it’s always a good idea to keep an eye on your fuel gauge, particularly if you’re planning a long journey. Whether you’re driving across the country or just down the road, you’ll want to make sure you have enough gas to get where you’re going. By looking for low fuel levels and refueling when necessary, you can ensure that you reach your destination safe and sound.

So, the next time you’re in the driver’s seat, don’t forget to check your fuel gauge regularly. A little preventative maintenance can go a long way towards keeping you on the road.

generac generator not producing power

Check Fuel Filter and Carburetor

One of the most important aspects of maintaining your vehicle is ensuring that your fuel filter and carburetor are in good condition. However, before you dive into checking those components, it’s essential to check your fuel levels. Low fuel levels can lead to engine misfires, stalling, and poor performance.

You can check your fuel levels by looking at your vehicle’s fuel gauge or by visually inspecting the fuel tank. If your fuel levels are low, be sure to fill up your tank with the recommended grade of gasoline. Once you’ve checked and filled your fuel levels, you can move on to checking your fuel filter and carburetor.

A dirty or clogged fuel filter can hinder fuel flow, leading to a decrease in engine performance. On the other hand, a malfunctioning carburetor can disrupt the fuel mixture’s balance, which can result in rough idling and poor acceleration. By checking these components regularly and performing any necessary maintenance, you can ensure your vehicle runs smoothly and efficiently on the road.

Inspect the Air Filter

If your Generac generator suddenly stops producing power, one of the possible culprits could be a clogged air filter. The air filter plays a crucial role in protecting the engine by preventing dirt and debris from entering and damaging it. Over time, however, the filter can become restricted, reducing airflow and impeding the generator’s performance.

To inspect the air filter, first, shut off the generator and allow it to cool down. Locate the air filter housing, usually on the side or back of the generator, and remove the cover. Check the filter element for signs of dirt, dust, or damage.

If dirty, you can clean it with compressed air or replace it with a new one. Remember to reinstall the filter properly for optimal performance. A clean air filter not only improves the generator’s output but also extends the lifespan of the engine, so don’t neglect this crucial maintenance task.

Check for Dirt and Debris

When it comes to maintaining your HVAC system, one of the most crucial tasks is inspecting the air filter for dirt and debris. Over time, your air filter can become clogged with dust, dirt, and other particles, which can cause your system to work harder than it needs to. This can result in reduced efficiency, higher energy bills, and even system breakdowns.

To avoid these issues, it’s important to inspect your air filter on a regular basis and replace it as needed. A good rule of thumb is to check your filter once a month and replace it every three months. However, if you have pets or allergies, you may need to replace it more frequently.

By keeping your air filter clean and well-maintained, you can improve the air quality in your home and extend the lifespan of your HVAC system. So, take a few minutes each month to check your air filter and ensure that it’s functioning properly.

Clean or Replace Air Filter

When it comes to maintaining your HVAC system, inspecting the air filter is one of the most crucial steps. A dirty or clogged air filter can lead to poor indoor air quality, decreased energy efficiency, and even system breakdowns. That’s why it’s important to inspect your air filter regularly and either clean or replace it as needed.

If you have reusable filters, you can clean them with a mild detergent and water, but make sure they’re completely dry before reinserting them. For disposable filters, it’s best to follow the manufacturer’s recommendations on when to replace them. Neglecting your air filter can lead to costly repairs and health issues, so make inspecting and maintaining it a habit.

Your family and your wallet will thank you.

Inspect the Spark Plug

If you find that your Generac generator is not producing power, one thing you should definitely check is the spark plug. Over time, spark plugs can become dirty, worn, or damaged, which can lead to a lack of power production. To inspect the spark plug, you’ll need to remove the protective covering and locate the plug itself.

If you notice any signs of buildup, such as rust or corrosion, it’s time to replace the plug. Keep in mind that the spark plug is a crucial component of your generator and neglecting to replace it can lead to poor performance or even damage to the generator itself. So, if you’re having power issues with your generator, don’t overlook the spark plug as a potential culprit.

Check for Damage or Wear

When inspecting your spark plug, it’s crucial to check for damage or wear. A damaged spark plug can hinder the performance of your engine and lead to bigger issues down the line. So, what should you look for when inspecting your spark plug? Cracks, chips, and any signs of corrosion are definite red flags, and you may need to replace the spark plug altogether.

Additionally, you should also check the electrode for any signs of wear and tear. If the electrode is eroded or damaged, it can cause misfires and ultimately damage your engine. It’s essential to keep your spark plugs in good condition to ensure your engine runs smoothly and efficiently.

Remember, prevention is better than cure, and regularly inspecting your spark plugs can save you money and hassle in the long run.

Clean or Replace Spark Plug

Inspecting the spark plug is an important aspect of maintaining a functional engine. Spark plugs should be visually inspected every 10,000 miles or so. Check for any signs of damage, including cracks or burn marks.

If the electrodes appear to be worn down, it’s best to replace the spark plug altogether. A simple test you can do is to use a spark plug tester, which will indicate if the spark plug is firing correctly. If you notice that the spark plug is dirty or covered in oil, it’s important to clean it off, rather than replacing it, as this could be a sign of a bigger issue with your engine.

By keeping a close eye on your spark plugs, you can ensure that your engine is running efficiently and avoid costly repairs down the line. So, make sure to inspect your spark plugs regularly to keep your engine in top shape!

Check the Wiring Connections

If you’re experiencing a problem with your Generac generator not producing power, one of the first things you should check is the wiring connections. Often, the issue can be as simple as a loose or disconnected wire. Carefully inspect all of the connections, ensuring that they’re tight and properly plugged in.

If you notice any frayed wires or signs of wear and tear, replace them immediately. Additionally, make sure that the circuit breakers and fuses are functioning properly. A tripped breaker or blown fuse could be the culprit behind a lack of power output.

Taking the time to check and maintain the wiring connections can help ensure that your Generac generator runs smoothly and efficiently, providing you with reliable power when you need it most.

Ensure the Generator is Grounded

When you’re setting up a generator, it’s crucial to make sure that it is grounded correctly. Grounding helps to prevent electrical shock and other hazards. So how can you check if your generator is grounded? First, inspect the wiring connections.

Make sure that the wires are connected properly and that there are no damaged cords. If any of the wiring is damaged, it’s important to fix it immediately before using the generator. Once you’ve inspected the wiring, check the grounding wire to make sure it’s connected and secured correctly.

The grounding wire is usually attached to a metal rod that is driven into the ground. This wire provides a safe path for electrical currents to travel through if there is a fault in the system. By ensuring that your generator is properly grounded, you can ensure that it’s safe to use and won’t pose a risk to you or others around it.

Verify Connections Are Tight

When trying to troubleshoot an electrical issue, it’s important to verify that all connections are tight. Loose wiring is a common cause of electrical malfunctions and can lead to bigger problems if not addressed promptly. Check all connections, including ground wires, circuit breakers, and outlets, to make sure they are secure.

Loose wires can cause sparks and overheating, which can result in damage to your electrical system or even a fire. It’s also important to make sure that wires and cables are not frayed or damaged, as this can lead to shorts or other issues. Taking the time to check your wiring connections can save you a lot of headaches and potentially dangerous situations in the long run.

Professional Help

If your Generac generator is not producing power, it’s essential to seek professional help immediately. Power outages can be stressful, and having a generator that is not functioning correctly can worsen the situation. One of the reasons why your generator may not be producing power is a faulty engine, which could be caused by a clogged air filter or fuel system issues.

Another common cause is a damaged or faulty alternator that needs replacing. Sometimes, it could be a simple issue like a blown fuse, which can be easily fixed by a professional. Whatever the reason may be, it’s essential to have your generator inspected by a professional who has experience with Generac generators to ensure that the problem is correctly identified and fixed.

Contacting a licensed electrician or Generac dealer is crucial to getting your generator back up and running and ensuring that your home and family stay safe during power outages.

Contact Generac service centre

Are you facing issues with your Generac generator? Don’t worry, professional help is just a call away! You can contact the nearest Generac service centre and get your generator inspected by the experts. Generac service centres have a team of trained technicians who can diagnose and repair any kind of issues with your generator. Whether it’s a minor glitch or a major breakdown, they can fix it all! You can also schedule regular maintenance checks to keep your generator in top condition.

Don’t wait till the last moment to get your generator serviced. A well-maintained generator can ensure uninterrupted power supply during emergencies. So, if you need any assistance with your Generac generator, reach out to the nearest service centre and get professional help.

Trust us, you won’t regret it!

Have a Professional Technician Inspect the Generator

If you want to avoid any unwanted surprises when you need your generator the most, it’s important to schedule a professional technician for an inspection. A generator is a complex machine that can deteriorate and accumulate damage over time, even if you don’t use it often. Plus, you don’t want to rely on a faulty generator during an emergency situation, when it can potentially be a matter of life and death.

A professional technician will be able to properly diagnose any issues and provide the right maintenance or repairs to ensure your generator is functioning properly when you need it most. So, don’t wait until it’s too late and schedule a generator inspection today. By doing so, you can have peace of mind and feel confident in your generator’s ability to provide power when you need it.


In conclusion, if your generac generator is not producing power, it’s like having a flashlight without batteries – it may look good, but it’s not going to be very useful in the dark. But fear not, with some troubleshooting and perhaps a bit of expert assistance, you can get your generator back up and running smoothly in no time. Remember, a little bit of maintenance goes a long way in ensuring your generator stays reliable and dependable when you need it most!


Why is my Generac generator not producing any power?
There could be multiple reasons for this. The fuel valve may be closed, the battery may be dead, or there may be a problem with the alternator. It’s best to consult a professional for a diagnosis.

How often should I maintain my Generac generator to avoid power issues?
It’s recommended to have your generator serviced every 6-12 months, depending on usage. Regular maintenance can help prevent power issues and extend the lifespan of your generator.

Can I troubleshoot my Generac generator on my own if it’s having power issues?
While it’s possible to troubleshoot some simple issues, it’s often best to leave it to a professional. Attempting to fix electrical issues without proper knowledge can be dangerous and cause further damage to the generator.

Is it normal for a Generac generator to produce less power over time?
As with any machinery, wear and tear can affect the performance of your generator over time. Regular maintenance can help prevent power loss and ensure your generator is running efficiently.

US Family Mart
Shopping cart