Unlock the Secret to Starting Your Brand New Generator Hassle-Free

There’s nothing more frustrating than investing in a brand new generator, only to discover that it won’t start when you need it most. Whether you’re facing a power outage or need to take your generator out on an outdoor adventure, getting it up and running is essential for your safety and comfort. So, what could be the problem? A faulty spark plug? Poor fuel quality? Or perhaps a dirty air filter? Don’t worry, we’ve got you covered! In this blog post, we’ll walk you through the common reasons why your brand new generator won’t start and provide some solutions to get it running smoothly again.

Check Fuel Level

If you’ve just bought a brand new generator and it won’t start, don’t panic! One thing that you may want to check is the fuel level. It’s possible that the generator has been sitting for a while and the fuel has evaporated or degraded. Make sure you have fresh gasoline in the tank and that you’re using the recommended fuel type.

It’s also important to remember to turn the fuel valve on before attempting to start the generator. This may seem obvious, but it’s a common mistake that can easily be overlooked. If the fuel level is fine, and you’ve checked all the other potential issues, it may be time to call in a professional for further diagnosis.

However, checking the fuel level is an easy and quick step that should be done before moving on to other potential problems.

Ensure fuel is in the tank and that the fuel valve is open

As you prepare to start your engine, one of the most important things to check is the fuel level in your tank. It’s a simple but crucial step that can save you from getting stranded in the middle of nowhere. You should always ensure that there’s enough fuel in the tank and that the fuel valve is open before turning on the engine.

Checking the fuel level is easy, and you can do it by simply looking at the fuel gauge on the dashboard. If the level is low, it’s always advisable to top it up with the right type of fuel. It’s worth noting that running out of fuel can cause significant damage to your engine, not to mention it’s an inconvenience you can do without.

Therefore, always ensure that you have enough fuel before starting your trip. Additionally, remember to switch off the engine when refueling and avoid smoking or using your phone near the fuel station. In short, checking the fuel level is an essential part of starting your engine, and it’s a habit that every driver should adopt.

So, are you ready to hit the road? Check your tank, open the fuel valve, and let’s go!

brand new generator won't start

Verify Spark Plug Connection

If you’re experiencing trouble starting your brand new generator, the spark plug connection could be to blame. Check to see if there’s any corrosion or damage to the spark plug itself and if it’s secure in its housing. A spark plug that’s not correctly connected will prevent your generator from starting up.

If the spark plug does seem to be the issue, consider replacing it with one that’s specifically recommended for your generator model. Otherwise, ensure the connection is tight and clean and try starting your generator again. If you still experience issues, consider contacting a professional for assistance.

Remember, a properly connected spark plug is key to getting your generator up and running.

Check that the spark plug is properly connected and clean

When troubleshooting engine issues, it’s important to check that the spark plug is properly connected and clean. A spark plug that isn’t connected well can cause misfires and poor engine performance. To check the connection, first, locate the spark plug and ensure that the wire is firmly attached.

If it’s loose, reconnect it and try starting the engine again. If that doesn’t work, it’s time to check the spark plug itself. Remove the plug and examine it for dirt or debris that may be interfering with the spark.

If the plug is dirty, clean it thoroughly before putting it back in. Remember, a clean spark plug ensures an efficient and well-running engine, so be sure to check it regularly and replace it if necessary.

Inspect the Battery

If you recently purchased a brand new generator and it won’t start, one of the first things you should inspect is the battery. Even though the generator is new, there’s still a chance the battery has been drained during transportation or storage. Check to make sure all connections are secure, and use a multimeter to test the voltage of the battery.

If it reads below 12 volts, it may be the reason why the generator won’t start. Consider jump-starting the battery to see if the generator will kick on. If it works after a jump-start, it’s possible that the battery may need to be replaced.

Remember that even brand new batteries can require routine maintenance, so regular inspection is key.

Check that the battery is charged and properly connected

Battery When your car fails to start, the first thing you might want to check is the battery. It might be that the battery is discharged, or there might be a loose connection. The first step is to inspect the battery to make sure it’s securely fastened to the car and that the cables are tight.

Next, check the battery’s charge. A dead battery might need to be charged, which can be done by connecting it to another car or using a battery charger. If the battery is fully charged and correctly connected, it’s less likely to be the cause of the issue.

Remember, the battery is the heart of your vehicle, so it’s imperative to inspect it thoroughly and ensure it’s working correctly.

Check Oil Level

If you’ve just invested in a brand new generator, it can be frustrating when it won’t start. One thing you should check before calling a technician is the oil level. Even though it’s a new machine, it’s possible that it was shipped with low or no oil.

Without proper lubrication, the engine could fail to start or cause damage. To check the oil level, locate the oil dipstick on the unit and remove it. Wipe it clean with a rag and reinsert it.

Then, pull it out again to see the oil level. If it’s low, add oil to the recommended level. If the oil level is fine, you may need to troubleshoot other issues such as a dead battery or a clogged fuel filter.

Taking care of your generator and performing routine maintenance are important to ensure it runs smoothly and provides you with backup power when you need it most.

Ensure that the oil is at the proper level and not old/bad

One crucial aspect of maintaining your vehicle is ensuring that the oil is at the proper level and not old or bad. Checking the oil level is a simple task that can save you from potential engine damage or breakdowns. First, make sure that your vehicle is parked on level ground and the engine has cooled down.

Locate the dipstick, which is usually labeled and has a bright color handle, and pull it out. Wipe it clean with a rag, re-insert it, and pull it out again to check the level. The oil should be between the two marks on the dipstick.

If it’s below the lower mark, you’ll need to add oil as soon as possible. Old or bad oil can also cause engine problems, so check the color and consistency of the oil. High-quality oil should be a clear, amber color; if it appears dark and cloudy, it’s time for an oil change.

Remember, keeping your vehicle’s oil at the proper level and making sure it’s fresh and clean is vital for its longevity and overall performance.

Verify Safety Features

If you’re experiencing trouble with a brand new generator that won’t start, one possible issue could be a lack of safety features. It’s important to verify that your generator has the necessary safety features before operating it, as they can prevent dangerous accidents and potentially save lives. Some common safety features to look for include circuit breakers, ground fault circuit interrupters (GFCIs), and carbon monoxide detectors.

Additionally, be sure to familiarize yourself with the manufacturer’s instructions and safety guidelines before using your generator. While it may seem frustrating to have a new generator that won’t start, prioritizing safety is always the smartest option.

Check that the safety features are disengaged

When operating heavy machinery or power tools, safety should always be a top priority. One key aspect of ensuring your safety is verifying that all safety features are disengaged before starting the equipment. This includes things like safety locks, kill switches, and emergency stop buttons.

Take the time to check that these features are all properly disengaged before proceeding with any work. It can be easy to get caught up in the excitement of a project or job, but the consequences of overlooking these safety features can be severe. It’s like driving a car without putting on your seatbelt or ignoring a stop sign – it only takes one mistake for something to go wrong.

By taking the extra precaution of verifying that all safety features are disengaged, you can help minimize the risk of accidents and injuries that could not only damage equipment but could cause injury to yourself or those around you. So, always remember to make safety your top priority and take that extra second to double-check that all safety features are disengaged before you begin work.

Contact Customer Support

If you’re experiencing trouble starting your brand new generator, don’t fret – it’s not an uncommon problem. Most of the time, it’s an easy fix that you can handle at home. Here’s what you should do: check the oil to make sure it’s at the right level and not dirty, check the air filter to ensure it’s clean and unclogged, and finally, check the fuel level to see if you need to add more gas.

If none of these steps work or you’re still having trouble, it’s time to contact customer support. They can help troubleshoot the issue and provide guidance to get your generator up and running. But don’t worry, most generator brands offer great customer support to help you in times like this.

Give them a call, and they’ll be happy to assist you in any way they can. With a little help, you’ll have your brand new generator running smoothly in no time.

Call the manufacturer’s customer support for further assistance

If you’re having trouble with a product and the instructions just aren’t cutting it, it’s time to reach out to the manufacturer’s customer support. Don’t feel intimidated to contact them – that’s what they’re there for! Typically, you can find a customer support number or chatbot through the manufacturer’s website. Once you’re connected, explain the issue you’re experiencing and what steps you’ve already taken to try and solve it.

The support representative will then guide you through further troubleshooting or recommend the next steps, which could include repair or replacement options. Keep in mind that the manufacturer’s customer support team is there to help, so don’t hesitate to reach out for assistance. By doing so, you can avoid the frustration of trying to figure out a solution on your own and get back to enjoying your product.


Well, if your brand new generator won’t start, it might be time to consider an oxymoron. After all, you expect a brand new product to work perfectly, but it seems like this generator missed the memo. Maybe it just needs a little nudge in the right direction, or perhaps it’s time to call in the experts.

Either way, one thing’s for sure: a generator that won’t start is as useful as a car without an engine. So, let’s get that engine revving and power up your world!”


What should I check if my brand new generator won’t start?
First, check if there is enough fuel and oil in the generator. Then, make sure the spark plug is clean and properly connected. If the battery is used, check if it is fully charged.

How do I troubleshoot my brand new generator that won’t start?
You can troubleshoot your new generator that won’t start by checking its fuel and oil levels, examining the spark plug, and inspecting the battery. You can also try to clean the carburetor or fuel filter.

Can low oil cause a brand new generator not to start?
Yes, low oil can cause a brand new generator not to start. This is because some newer generators have a low-oil shutoff function that automatically stops the engine if the oil level is too low.

Why won’t my brand new generator start after storage?
If your brand new generator won’t start after storage, it may be due to old fuel or a clogged carburetor. Make sure to drain the fuel and oil before storing the generator and use fresh fuel when restarting it.

US Family Mart
Shopping cart