Troubleshooting Your Brand New Generator: Tips to Get it Running When it Won’t Start


As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

Have you ever been stranded without power during an emergency or camping trip because your generator won’t start? It’s frustrating and stressful, especially when you don’t know what’s causing the problem. But before you give up and call a professional to fix it, there are a few troubleshooting steps you can take to save time, money, and possibly get your generator running again. In this blog, we’ll cover some common reasons why generators don’t start and offer solutions to get them back up and running.

So, let’s dive in and fix that non-starting generator!

Check Fuel Levels

If your brand new generator won’t start, one possible reason could be low fuel levels. Even if you just refilled the tank, it’s possible that air pockets have formed and are preventing fuel from reaching the engine. To check the fuel level in your generator, locate the fuel gauge or simply remove the fuel cap and visually inspect the tank.

If the fuel level is low, fill it up with fresh fuel and try starting the generator again. It’s also important to make sure that you’re using the correct type of fuel for your generator and that it’s properly stored to avoid contamination. By regularly checking and maintaining your generator’s fuel levels, you can help ensure that it starts up when you need it most.

Ensure There’s Gas in the Tank

Ensuring that there is enough gas in the tank is essential for any vehicle. Checking fuel levels is a simple task that should not be underestimated or overlooked. It can save you time, money, and possibly a headache.

Imagine being in a hurry to get somewhere and your car runs out of gas. This scenario can be avoided by taking a few minutes to check fuel levels before heading out. It also prevents you from being stranded in an area with no gas station in sight.

Ensuring that there is enough fuel in the tank before leaving on a trip is crucial for a successful and stress-free journey. A simple check of the fuel gauge can provide useful information to avoid any unpleasant surprises. Regularly checking fuel levels can also be an indicator of potential problems regarding fuel consumption, which can be addressed before it becomes a major issue.

Overall, checking fuel levels is a straightforward task that can prevent significant inconvenience and is well worth the effort.

brand new generator won t start

Check for Clogged Fuel Filters

Checking for clogged fuel filters is essential to keep your vehicle running smoothly. However, before doing so, it is crucial to check the fuel levels in your vehicle. Low fuel levels can cause your fuel filters to clog, so it is best to fill up the tank before proceeding with anything else.

Once you have filled the tank, you can now move on to checking the fuel filters. Clogged fuel filters can cause your engine to stall, and in some cases, can cause your vehicle not to start at all. To check for clogged fuel filters, you can refer to your vehicle’s manual to locate the filters and see how to replace them.

It is best to replace them regularly to prevent any future problems with your vehicle. Remember, checking for clogged fuel filters is a crucial part of maintaining your vehicle’s health, so never neglect it. Keep your engine running smoothly by regularly checking your fuel filters and fuel levels.

Inspect the Spark Plug

If you’ve just purchased a brand new generator and it won’t start, it can be frustrating. However, before you take it back to the store or call for repairs, make sure to inspect the spark plug first. A faulty spark plug is a common reason why generators fail to start.

Over time, the spark plug may become dirty, worn, or damaged, which can prevent it from creating a spark to ignite the fuel. Start by disconnecting the spark plug wire and removing the plug. Look for any signs of damage such as cracks or chipping, and make sure it’s not excessively dirty or covered in residue.

If any issues are found, replace the spark plug with a new one. Reconnect the wire and try starting the generator again. It’s a simple fix that could save you time and money in the long run.

Remove and Inspect the Spark Plug

When it comes to maintaining your lawn mower, one important task is inspecting the spark plug. Before removing the spark plug, make sure the engine is cool to avoid any risk of injury. Once you’ve removed the spark plug, take a good look at it.

Check for any signs of wear, damage, or fouling. The condition of the spark plug can tell you a lot about the health of your engine. If the electrode is dirty or covered in debris, use a wire brush to clean it off.

Make sure that the gap between the electrodes is still within the manufacturer’s recommended specifications. A damaged or worn spark plug can negatively impact the performance of your lawn mower and cause it to run poorly. By inspecting and cleaning the spark plug regularly, you can ensure that your mower runs smoothly and efficiently.

Look for Signs of Wear or Dirt Build-Up

When it comes to inspecting your vehicle’s spark plug, one of the most important things to look for is signs of wear or dirt build-up. Over time, spark plugs can become worn down or corroded, making them less effective and reducing the performance of your engine. To inspect your spark plug, start by removing it from your engine and examining the tip for any signs of wear or damage.

You should be looking for things like cracks, chips, or other signs of wear that could indicate that it’s time to replace your spark plug. You should also clean the area around the base of the spark plug to make sure that there’s no dirt or debris that could affect its performance. By taking the time to inspect your spark plug, you can ensure that your engine is running at its best and avoid costly repairs down the line.

Check the Oil Level

If you have just purchased a brand new generator and are struggling to get it started, the first thing you might want to check is the oil level. Many generators come with a low oil shut-off feature that prevents the engine from starting if there isn’t enough oil. Make sure your generator is on a level surface and check the oil level with the dipstick (found under the oil cap).

The dipstick will have markings indicating the minimum and maximum levels. If the oil level is low, add more oil until it reaches the maximum level on the dipstick. Once you have added enough oil, try starting the generator again to see if it will start.

If the oil level is already at the maximum, or adding oil doesn’t resolve the issue, you may need to consult your generator’s manual or contact a professional for assistance. Remember, keeping your generator’s oil level in check is an essential part of maintaining its overall health and ensuring it runs smoothly.

Make Sure There’s Enough Oil

One essential step in maintaining your car’s engine health is to ensure that you have enough oil in the engine. Checking your oil level is easy and something that you can do at home with the help of a dipstick. Firstly, make sure your car is on a level surface and turned off.

Locate the dipstick, pull it out, and wipe it clean. Then, insert the dipstick back fully, take it out again, and check for the oil level markings. If the oil level is below the minimum, it’s a clear indication that your car needs an oil top-up, while if the level is above the maximum, it’s best to drain the excess oil.

Not having enough oil in the engine can lead to engine damage, and you don’t want that to happen. Therefore, we advise our readers to check their oil levels often, as it’s a small job that can save you significant amounts of money and hassle in the long run.

Check for Oil Leaks or Contamination

When it comes to maintaining your car’s engine, checking the oil level is one of the simplest and most important tasks you should carry out regularly. The oil in your car’s engine is responsible for lubricating its moving parts and preventing friction, which can cause damage to the engine. To check your car’s oil level, locate the dipstick (usually located near the engine) and pull it out.

Wipe it clean with a rag and then reinsert it, making sure it’s all the way in. Pull it out again and check the oil level. Ideally, the oil should be between the min and max markings on the dipstick.

If it’s below the minimum, you’ll need to add oil to your engine. Not checking your oil level regularly can lead to serious problems such as engine damage, so be sure to make it part of your regular car maintenance routine. Remember, a little prevention goes a long way!

Test the Battery

If you’ve just purchased a brand new generator and it won’t start, the battery could be the culprit. Sometimes, generator batteries can lose their charge over time, especially if they haven’t been used in a while. To test the battery, start by turning off the generator and disconnecting the negative terminal of the battery.

Grab a multimeter and use it to test the battery’s charge. A fully charged battery should read around 16 volts.

If it’s significantly below that, it may need to be charged or replaced. Keep in mind that a dead battery is not uncommon with new generators, as they may have been sitting in storage for some time. If you’ve determined that the battery is the issue, try to recharge it and see if that solves the problem.

If not, you may need to replace the battery altogether.

Ensure the Battery Has a Charge

If you want to ensure your battery has a charge, it’s important to test it regularly. A dead battery can be a frustrating experience, especially if you’re running late or on a long journey. One way to test your battery is to use a voltmeter.

Simply attach the voltmeter to the battery’s terminals, and it will give you a reading of the battery’s charge. If the reading is low, it’s time to charge the battery, or even consider replacing it altogether. Even if your car starts without any issues, it’s still a good idea to test the battery periodically to catch any potential problems before they become serious.

By taking the time to test your battery, you’ll save yourself from getting stranded and ensure that your vehicle is always ready to go when you need it.

Check Battery Connections

When it comes to keeping your car running smoothly, one of the most important things to keep in mind is the battery. A dead battery can really put a damper on your day, so it’s important to make sure your battery is in good working order and properly connected. To check the battery connections, start by popping the hood and inspecting the battery.

Make sure that the cables are attached firmly to the battery terminals and that there is no corrosion or rust present. If you notice any damage or loose connections, it’s important to fix them right away to prevent further problems down the road. You can also test the battery to see if it needs to be recharged or replaced, which can save you a lot of time and hassle in the long run.

By taking the time to check your battery regularly, you can ensure that your car runs smoothly and reliably, no matter where the road takes you.

Call A Professional

If you are facing the frustrating situation where your brand new generator won’t start, it’s important not to panic. There are a variety of reasons why this might be happening, and many of them can be easily fixed with the right skills and tools. However, if you’re not an experienced mechanic or electrician, it’s best to call in a professional.

Trying to diagnose or repair your generator on your own could lead to further damage, voiding the warranty or causing injury. So don’t hesitate to reach out to a qualified technician who can quickly identify and resolve the problem. They can provide the expert guidance you need to get your generator up and running safely and efficiently, saving you time and hassle in the long run.

When to Contact a Professional Technician

As much as we want to fix things ourselves, sometimes it’s best to call in a professional technician. When it comes to our appliances or electronic gadgets, there are certain signs that we must not ignore. For instance, if you notice that your washing machine isn’t draining water, or your air conditioner is producing warm air, it’s time to call an expert.

Attempting to repair them without proper knowledge and equipment might only worsen the problem. Similarly, if you’re encountering electrical issues like overloaded circuits or flickering lights, don’t take risks and contact an electrician. Hiring someone who specializes in the field can save you time and money in the long run.

Remember that a reliable technician has the expertise and experience to diagnose and repair the issue in a safe and efficient manner. Don’t hesitate to give them a call and let them take care of the problem before it becomes worse.


Looks like this brand new generator was so ahead of its time that it refused to start in the present! Perhaps it’s waiting for a future where all generators run on renewable energy sources or maybe it just needs a good old-fashioned kickstart. Either way, it’s time to roll up our sleeves and give this stubborn machine the TLC it needs to spring to life. After all, a generator that won’t start is like a comedian who can’t tell a joke – useless!”


Why won’t my brand new generator start?
There could be several reasons why your brand new generator won’t start. It could be due to a lack of fuel or oil, a faulty spark plug, or even a dead battery. Check all of these components to troubleshoot the issue.

How do I jumpstart my brand new generator?
If your brand new generator won’t start because of a dead battery, you can jumpstart it using a car or another generator. Connect the positive and negative cables to the corresponding terminals on both devices and allow the battery to charge for a few minutes before starting the generator.

What kind of fuel should I use in my brand new generator?
Check the user manual for your brand new generator to determine the appropriate type of fuel to use. Typically, most generators run on gasoline, diesel, or propane.

Can I replace a faulty spark plug in my brand new generator myself?
Yes, if you have experience with small engine repair, you can replace a faulty spark plug in your brand new generator yourself. Otherwise, it’s best to take it to a professional for maintenance and repairs.