Troubleshooting Blink Camera: Why Your Device Failed to Arm and How to Fix It

Are you facing issues with your Blink camera not arming? It can be frustrating when you rely on your security camera to work, and it fails to do so. A non-functioning camera leaves you vulnerable, and you need to rectify the problem immediately. Blink cameras are popular because of their affordability, easy installation, and user-friendly features.

However, like any other device, they can malfunction. The reason for a Blink camera failing to arm can vary from battery issues, network connectivity, firmware updates, or a camera fault. Don’t panic! This blog will guide you through troubleshooting the issue.

We will walk you through the necessary steps to fix Blink cameras that have failed to arm. We’ll start with the most basic fixes, and if they don’t work, we’ll move to more advanced ones. So, if you’re having trouble with your Blink cameras and don’t know what to do, keep reading.

We’ve got you covered!

Check Camera Connectivity

If you’ve encountered the error message “Blink camera failed to arm,” don’t worry – it’s a common issue that can usually be resolved by checking your camera’s connectivity. First, make sure that the camera is powered on and has a strong Wi-Fi signal. You may need to move it closer to your router or install a Wi-Fi extender to improve the signal.

Next, check that the camera is properly paired with your Blink app and that your app is up to date. If these steps don’t work, try resetting the camera and setting it up again from scratch. In some cases, the issue may be with your network or the Blink server, so check for any outages or scheduled maintenance.

By troubleshooting your camera’s connectivity, you can help ensure that it arms and disarms properly and provides you with the security footage you need.

Make sure the camera is connected to Wi-Fi

When it comes to setting up your camera, one of the most important things to check is its connectivity to Wi-Fi. You may have purchased a camera with all the latest features, but if it is not connected to a strong Wi-Fi network, then you may not be able to enjoy its full potential. Before starting to use your camera, ensure that it is connected to Wi-Fi.

The process of connecting to Wi-Fi may vary depending on the camera model, but it usually involves accessing the settings menu and following the instructions. Once your camera is connected to Wi-Fi, you can remotely access it using your smartphone, laptop, or tablet. This means you can keep an eye on your home or office even when you are not on the premises.

By checking your camera’s connectivity, you can ensure that you get the best results from your investment.

blink cameras failed to arm

Ensure that Blink servers are online

Having a reliable and consistent internet connection is crucial to successfully using Blink cameras. To ensure that the Blink servers are online, it is important to check the camera connectivity. This involves checking whether the camera is connected to the internet and if it is receiving a strong signal.

One way to do this is to check the signal strength in the Blink app. If the signal is weak, it may be worthwhile to move the camera closer to the router or to use a Wi-Fi extender. Additionally, regularly checking for firmware updates and ensuring that the camera is powered on and activated can help maintain a strong connection.

By keeping a close eye on the camera connectivity, you can ensure that the Blink servers are online and your cameras are functioning properly.

Verify Camera Settings

If you have encountered issues with your Blink cameras failing to arm, it could be due to incorrect camera settings. Before arming your cameras, it is crucial to verify that the cameras are appropriately configured. Check that the motion detection settings are enabled and set up correctly.

You can also ensure that your cameras have sufficient power or are correctly connected to the internet. It may also be beneficial to check if the cameras have the latest firmware version installed. In case you experience trouble, restarting the cameras or resetting them to default settings may help.

Additionally, reviewing the user manual or consulting Blink customer support can provide valuable insights and solutions to any issues you might be facing with your Blink cameras. Taking steps to verify the camera settings can help ensure that your Blink cameras arm correctly and provide adequate security monitoring for your home or business.

Ensure camera arm/disarm settings are correct

One important step to ensuring your security cameras are working correctly is to verify their arm/disarm settings. This will determine when the cameras activate and record, and when they remain inactive. It’s crucial to check that these settings are correctly configured to match your specific security needs.

To ensure you’re getting the most out of your cameras, consider various factors such as time of day, activity levels, and potential threats within your property. It may be tempting to leave cameras running 24/7, but this can lead to unnecessary use of storage and decreased camera performance. By taking the time to customize your camera settings, you’ll have peace of mind knowing that your property is secure and your footage is optimized for accuracy and relevance.

Check if motion detection is enabled

As a security-conscious person, one of the first things you would do after setting up a surveillance camera is enabling motion detection. But have you ever wondered if motion detection is actually enabled on your camera? It’s always a good idea to verify camera settings periodically and make sure everything is functioning as expected. Checking if motion detection is enabled on your camera is a straightforward process that can save you from potential security threats.

One way to do this is by accessing your camera’s settings menu, where you can view and change various camera settings. You can check whether the motion detection feature is turned on and adjust sensitivity levels to suit your needs. It’s important to note that motion detection settings may vary depending on the camera model and software version.

By verifying your camera settings, you can ensure that your surveillance system is always operational and providing maximum coverage of your property.

Reset Camera and Sync Module

If you’re having trouble arming your Blink cameras, a quick way to troubleshoot the issue is by resetting your cameras and sync module. This can be done by pressing and holding the reset button on the sync module until the LED light starts flashing. Then, go to the Blink app and remove the sync module from your account.

After that, add it back to your account and re-sync all your cameras. This process may take a few minutes, but it can help resolve any connection issues and get your Blink cameras up and running again. Remember, troubleshooting is all about trial and error, so don’t hesitate to experiment and try different methods until you find the one that works best for you.

So, if your Blink cameras failed to arm, don’t panic, just try resetting your cameras and sync module.

Reset camera and sync module to factory settings

If you’re experiencing issues with your camera or sync module, resetting them to their factory settings might just do the trick. To reset your camera, press and hold the reset button on the bottom until the LED starts flashing rapidly. Release the button and wait for the camera to reboot.

To reset your sync module, unplug it for 10 seconds and then plug it back in. Then press and hold the button until the LED starts flashing rapidly. Release the button and wait for the sync module to reboot.

Keep in mind that resetting your camera and sync module will erase all saved settings, including Wi-Fi connection information, so you’ll need to set them up again from scratch. But hopefully, resetting them will resolve any issues you were experiencing and get you back to monitoring your home or property with ease.

Re-sync the camera and sync module

If you’re experiencing connectivity issues with your Arlo camera, the first thing you should try is re-syncing the camera and sync module. This process involves resetting both devices, which will erase all settings and data on them. To reset your camera, locate the reset button on the bottom of the camera and press and hold it until the LED lights start flashing.

This indicates that the camera has been reset successfully. To reset the sync module, locate the reset button on the back of the module and press and hold it until the LED lights turn off and then back on again. Once you’ve reset both the camera and sync module, you can begin the re-syncing process.

Start by pressing the sync button on the sync module, followed by the sync button on the camera. The LED lights on both devices will flash rapidly, indicating they are synced. Once this process is complete, your camera should be connected and functioning properly.

By ensuring that your Arlo camera and sync module are properly synced, you can avoid connectivity issues and keep your home or business secure.

Contact Blink Support

If your blink cameras failed to arm, don’t panic. Our Blink support experts can help you troubleshoot the issue and get your cameras back online in no time. There could be many reasons why your blink cameras are not arming, and our team can help you solve them all.

We understand the frustration of not having your cameras function properly when you need them the most. Our team will work closely with you to identify the root cause of the problem and provide the best solutions to ensure that your cameras work as intended. So, if you’re experiencing any issues with your blink cameras, contact our support team today and let us help you resolve them.

Don’t wait until it’s too late, protecting your home and family is too important to leave to chance.

Get assistance from Blink’s technical support team

Are you experiencing issues with your Blink security camera system? Don’t worry, Blink’s technical support team is here to help. You can easily contact Blink’s support team through their website or by phone. The website has a comprehensive FAQ and troubleshooting section, but if you can’t find the solution to your problem there, you can speak with a representative by phone.

Blink’s support team is knowledgeable and ready to assist you in resolving any technical issues you may encounter. So, if you’re having trouble setting up your cameras, accessing your footage, or any other issues with your Blink system, don’t hesitate to contact their support team. They are there to help, and with just a simple phone call, you can get your system back up and running in no time.

Keep in mind that it’s important to provide as much information about your problem as possible, so the support team can quickly and efficiently resolve your issue. With Blink’s reliable support system, you can rest assured that your security cameras are in good hands.


Looks like the blink cameras didn’t quite live up to their name – they blinked and missed the opportunity to arm themselves. Let’s hope they can get their act together before the next security breach, or else they might need a new name – maybe “Naptime” cameras?”


Why did my Blink camera fail to arm?
There could be several reasons why your Blink camera failed to arm. Firstly, ensure that your camera is within range of your Wi-Fi network. Also, check that the batteries are fully charged and inserted correctly. Additionally, make sure that your camera firmware is up-to-date.

Why is my Blink camera not connecting to the Wi-Fi network?
If your Blink camera is not connecting to the Wi-Fi network, it could be due to poor Wi-Fi signal strength in the camera location. It could also be due to an incorrect Wi-Fi network password or an outdated firmware version. Try moving the camera closer to the router or resetting it as a first step.

How do I troubleshoot Blink camera connectivity issues?
If you are experiencing connectivity issues with your Blink camera, try the following steps: – Check the strength of your Wi-Fi signal in the camera’s location – Restart your router and Blink camera – Ensure that you are using the correct Wi-Fi network password – Update the camera’s firmware – Re-position the camera to possibly get a better signal.

Can multiple Blink cameras connect to one account?
Yes, multiple Blink cameras can connect to one account. You can manage all your cameras from a single account using the Blink app. You can also add additional users to your account and share access to your cameras with them.

US Family Mart
Shopping cart